Telemecanique Square D LD1 LB030

Technical details of the LD1 LB030

• Type : Manual motor starter with integrated thermal protection (DOL contactor-circuit breaker)
• Nominal current (Ie) : 18 A
• Insulation voltage (Ui) : 690 V
• Impulse voltage (Uimp) : 6 kV
• Frequency : 50/60 Hz
• Protective beach : 0.1 to 18 A with LB1 LB03P modules
• Tightening torque : 15 lb·in
• Approximate dimensions : 8 x 8 x 3 inches (203 x 203 x 76 mm)
• Weight : approximately 900 g
• Wiring : 75°C copper, 10 to 16 AWG gauges
• Standards : IEC 947-1, 947-2, 947-4-1, 947-6-2
• Manufacturer : Schneider Electric (formerly Telemecanique/Square D)Schneider Electric+6Schneider Electric+6Schneider Electric+6Schneider Electric+7Scribd+7auto2mation.com+7Schneider Electric+5eBay+5Aeliya Marine+5Integrity Electric Direct+3eBay+3auto2mation.com+3Schneider Electric+9Integrity Electric Direct+9eBay+9Schneider Electric+5Aeliya Marine+5auto2mation.com+5EcoTech Solutions Inc.+4auto2mation.com+4Aeliya Marine+4

🔁 Compatible protection modules

The LD1 LB030 is designed for use with LB1 LB03P series thermal protection modules, offering an adjustment range of 0.1 to 18 A. These modules are essential to ensure adequate thermal protection of the motor.

⚠️ Important Notes

• Contact Replacement: Schneider Electric advises that replacement contacts are not available for integrated starters in this series.
• Coil Voltage: The coil voltage is indicated above terminal A1, in the upper left corner of the device.